Sarna Industries

High pressure Burners

'T' Type Flame Throwing Torch Burners

Model No.	Dimensions				Optimum Working Pressure		Consumption per hour		Rated Heat Output
	Length		Head Diameter		Optimum Working Pressure		Consumption per hour		Rated Heat Output
	mm	ins	mm	ins	Kg/cm²	psig	kgs	lbs	Kcal/hr	btu/hr
T-100	260	10.30	155	6.10	0.3	4.5	4.5	10.0	50,400	2,00,000
T-78	260	10.30	120	4.70	0.3	4.5	3.56	7.8	40,350	1,60,000

T-100

T-78

Model No.	Dimensions				Optimum Working Pressure		Consumption per hour		Rated Heat Output
	Length		Head Diameter		Optimum Working Pressure		Consumption per hour		Rated Heat Output
	mm	ins	mm	ins	Kg/cm²	psig	kgs	lbs	Kcal/hr	btu/hr
T-50	230	9.05	103	4.0	0.3	4.5	2.24	5.0	25,200	1,00,000
T-65	205	8.2	118	4.65	0.3	4.5	1.70	3.77	19,000	75,400

T-50

T-65

Model No.	Dimensions				Optimum Working Pressure		Consumption per hour		Rated Heat Output
	Length		Head Diameter		Optimum Working Pressure		Consumption per hour		Rated Heat Output
	mm	ins	mm	ins	Kg/cm²	psig	kgs	lbs	Kcal/hr	btu/hr
T-35	200	7.87	92	3.60	0.3	4.5	1.58	3.5	17,650	70,000
T-22	190	7.50	70	2.70	0.3	4.5	0.9	2.0	10,100	40,000

T-35

T-22

These are heavy duty burners for use in general cooking,bulk frying and for general heating requirements of the textile,pharmaceutical & chemical industries where heating by convection is required.

These burners are recommended to be used at a pressure of 0.3 kg/cm² (4.5psig),however,this may be varied � 25% the heat outpt being varied accordingly.

Note - These burners are available in both CI & Brass Checknuts.

home | about us | products | contact us

Close Window